Wedge Anchors
This is an example of a Mechanical Anchor. We carry a variety of conventional drilling and anchoring systems, each of which is different in its method of taking the applied load and transferring it through an anchor to the base material. Each type is designed for a specific application. Among these types are Cast-In-Place, Drilled In, Friction, Clamping, Compression, Undercut and Bonded Anchors.
These threaded wedge anchors feature an interlocking wedge action for maximum contact with masonry. Made from carbon steel or stainless steel, if corrosive protection is needed, they are fully assembled and ready to use. Stocked in diameters from 1?4" to 1" and lengths from 1 3/4" to 12". Rod Hangar, Rod Coupling and Tie-Wire versions are also available.
Group codes Represented: PSTUD
| W x L
|
E
|
G
|
T
|
Average Ultimate Tensile & Shear Values | |
Anchor Size |
Minimum Embedment |
Fastens Material Up To |
Thread Length |
4000 psi
| |
Tensile |
Shear |
||||
1/4-20 x 1 3/4 |
1 1/8 |
3/16 |
3/4 |
1855 |
1311 |
1/4-20 x 2 1/4 |
5/8 |
||||
1/4-20 x 3 1/4 |
1 1/2 |
||||
5/16-18 x 2 3/4 |
1 1/2 |
5/8 |
1 1/8 |
2500 |
2455 |
5/16-18 x 4 |
2 |
||||
3/8-16 x 2 1/4 |
1/8 |
2464 |
3294 |
||
3/8-16 x 2 3/4 |
1/2 |
||||
3/8-16 x 3 |
3/4 |
||||
3/8-16 x 3 3/4 |
1 1/2 |
||||
3/8-16 x 5 |
2 3/4 |
||||
3/8-16 x 6 1/2 |
4 1/4 |
||||
1/2-13 x 2 3/4 |
2 1/4 |
1/8 |
1 1/4 |
4982 |
6243 |
1/2-13 x 3 3/4 |
7/8 |
||||
1/2-13 x 4 1/4 |
1 1/2 |
||||
1/2-13 x 5 1/2 |
2 1/8 |
||||
1/2-13 x 7 |
4 |
||||
1/2-13 x 8 1/2 |
5 1/2 |
||||
1/2-13 x 10 |
6 1/2 |
||||
5/8-11 x 3 1/2 |
2 3/4 |
3/16 |
2 |
7007 |
8084 |
5/8-11 x 4 1/2 |
1 1/8 |
||||
5/8-11 x 5 |
1 1/2 |
||||
5/8-11 x 6 |
2 1/2 |
||||
5/8-11 x 7 |
3 1/2 |
||||
5/8-11 x 8 1/2 |
5 |
||||
3/4-10 x 4 1/4 |
3 1/4 |
1/2 |
10820 |
12556 |
|
3/4-10 x 4 3/4 |
3/4 |
||||
3/4-10 x 5 1/2 |
1 1/2 |
||||
3/4-10 x 6 1/4 |
2 1/4 |
||||
3/4-10 x 7 |
3 |
||||
3/4-10 x 8 1/2 |
4 1/2 |
||||
