skip to: page content | links on this page | site navigation | footer (site information)

Alma Bolt Company & Prime Fasteners 1-800-526-2200

Home | Size / Thread Reference
Hex Head Cap | Hex Tap | Heavy Hex Head | Square Head | Carriage | Elevator | Step | T-Slot | Flanged | Counterbore | L-Anchor | Scraper Blade | Head Plow
Machine | Self-Tapping | Thread Cutting | Self-Drilling | Drywall & Framing | Construction | Wood Application | Security | Plastic Accessories
Cotter | Hair | Safety | Clevis | Taper | Dowel | Pull Dowel | Coiled Spring | Spring Roll | Lynch | Snapper | Hitch | Lanyards
Flat | Square Bevel | Star | Belleville | Lock | Bonded Sealing | Neoprene | Countersunk Finishing | Fender | Dock
Hex | Heavy Hex | Tee | T-Slot | Table Flanged | Acme Thread | Coupling | Castle | Square | Lock | Kep | Aluminum Binding Posts | Cold Forged Wing | Security
Wire Rope | Custom Assemblies | Super Slings | Thimbles | Clips | Swaging Sleeves | Swaging Stops | Swaging Tool
Stainless Steel | Hooks | Links | Rings | Load Binders | Cold Shuts | Double Clevis | Screw Pin Anchor | Chain Sling | Nylon Straps | Polyester RoundslingsT
Turnbuckles | Eye Bolts | U-Bolts | J-Bolts | S-Hooks | Adjustable Clevis Yokes | Steel Clevises
Hex Keys | Ball Drivers | Taps | Drills | Dies | Clamps | Electric Terminals | Nylon Wire Ties | Woodruff Keys | Key Stock Bars | Retaining Rings | Grease Fittings
Allenuts® | Head Cap Screws | Flat Head Cap Screws | Button Head Cap Screws | Set Screws | Hex Pressure Plugs | Shoulder Screws
Powdered Actuated Tools | Powder Actuated Pins | Mechanical Anchors | Adhesive Anchors | Masonry Drills | Core Bits | Powder Actuated Loads

Security Nuts

Spanner Nuts

Spanner Nuts are a tamper-resistant nut made of non-ferrous, rust-resistant zinc alloy. They cannot be installed or removed without the corresponding hand driver. Available in sizes from 1/4" to 3/8".

One matching tool fits all three sizes of nuts. Don’t forget to ask for one if you don’t have one.

Aluminum Break Away Nuts

Tamperproof Aluminum Break Away Nuts have a head that when fully torqued breaks off for security. Stocked with an anodized finish. Available in sizes from #10 to 1/2".

Group codes Represented: TBN
Part# Example: 25UABN

 

About Us | Contact Us | ©2006 ABC Fastener Group, Inc.