Alma Bolt Company & Prime Fasteners 1-800-526-2200

Home | Size / Thread Reference
Hex Head Cap | Hex Tap | Heavy Hex Head | Square Head | Carriage | Elevator | Step | T-Slot | Flanged | Counterbore | L-Anchor | Scraper Blade | Head Plow
Machine | Self-Tapping | Thread Cutting | Self-Drilling | Drywall & Framing | Construction | Wood Application | Security | Plastic Accessories
Cotter | Hair | Safety | Clevis | Taper | Dowel | Pull Dowel | Coiled Spring | Spring Roll | Lynch | Snapper | Hitch | Lanyards
Flat | Square Bevel | Star | Belleville | Lock | Bonded Sealing | Neoprene | Countersunk Finishing | Fender | Dock
Hex | Heavy Hex | Tee | T-Slot | Table Flanged | Acme Thread | Coupling | Castle | Square | Lock | Kep | Aluminum Binding Posts | Cold Forged Wing | Security
Wire Rope | Custom Assemblies | Super Slings | Thimbles | Clips | Swaging Sleeves | Swaging Stops | Swaging Tool
Stainless Steel | Hooks | Links | Rings | Load Binders | Cold Shuts | Double Clevis | Screw Pin Anchor | Chain Sling | Nylon Straps | Polyester RoundslingsT
Turnbuckles | Eye Bolts | U-Bolts | J-Bolts | S-Hooks | Adjustable Clevis Yokes | Steel Clevises
Hex Keys | Ball Drivers | Taps | Drills | Dies | Clamps | Electric Terminals | Nylon Wire Ties | Woodruff Keys | Key Stock Bars | Retaining Rings | Grease Fittings
Allenuts® | Head Cap Screws | Flat Head Cap Screws | Button Head Cap Screws | Set Screws | Hex Pressure Plugs | Shoulder Screws
Powdered Actuated Tools | Powder Actuated Pins | Mechanical Anchors | Adhesive Anchors | Masonry Drills | Core Bits | Powder Actuated Loads

Rebar Cutter Bits

Rebar Cutter

Mechanical and Adhesive masonry anchors require a pre-drilled hole. Our Concrete Auger Bits are an excellent choice for preparing the anchoring hole.

 

Specifically for use in drilling through mesh or reinforcing bars. These bits have a 1/2" straight shank and a carbide tipped configuration at the working end. The fluted core has a lngitudinal slot for efficient removal of concrete and steel cuttings. Available sizes below.

Masonry Drill damaged? Want to know the cause? See the Masonry Drill Bit Damage Table.

Rebar Cutter Bit Sizes
Part#'s
Drill Size (In.)
Usable Length
Overall Length
0845R
1/2 x 12
11"
12"
0846R
5/8 x 12
0849R
3/4 x 12
0851R
7/8 x 12
0853R
1 x 12
0855R
1 1/4 x 12
Rebar Cutter Bits are designed for rotary drilling ONLY in a standard 1/2" chuck rotary drill.

 

About Us | Contact Us | ©2006 ABC Fastener Group, Inc.