Alma Bolt Company & Prime Fasteners 1-800-526-2200

Home | Size / Thread Reference
Hex Head Cap | Hex Tap | Heavy Hex Head | Square Head | Carriage | Elevator | Step | T-Slot | Flanged | Counterbore | L-Anchor | Scraper Blade | Head Plow
Machine | Self-Tapping | Thread Cutting | Self-Drilling | Drywall & Framing | Construction | Wood Application | Security | Plastic Accessories
Cotter | Hair | Safety | Clevis | Taper | Dowel | Pull Dowel | Coiled Spring | Spring Roll | Lynch | Snapper | Hitch | Lanyards
Flat | Square Bevel | Star | Belleville | Lock | Bonded Sealing | Neoprene | Countersunk Finishing | Fender | Dock
Hex | Heavy Hex | Tee | T-Slot | Table Flanged | Acme Thread | Coupling | Castle | Square | Lock | Kep | Aluminum Binding Posts | Cold Forged Wing | Security
Wire Rope | Custom Assemblies | Super Slings | Thimbles | Clips | Swaging Sleeves | Swaging Stops | Swaging Tool
Stainless Steel | Hooks | Links | Rings | Load Binders | Cold Shuts | Double Clevis | Screw Pin Anchor | Chain Sling | Nylon Straps | Polyester RoundslingsT
Turnbuckles | Eye Bolts | U-Bolts | J-Bolts | S-Hooks | Adjustable Clevis Yokes | Steel Clevises
Hex Keys | Ball Drivers | Taps | Drills | Dies | Clamps | Electric Terminals | Nylon Wire Ties | Woodruff Keys | Key Stock Bars | Retaining Rings | Grease Fittings
Allenuts® | Head Cap Screws | Flat Head Cap Screws | Button Head Cap Screws | Set Screws | Hex Pressure Plugs | Shoulder Screws
Powdered Actuated Tools | Powder Actuated Pins | Mechanical Anchors | Adhesive Anchors | Masonry Drills | Core Bits | Powder Actuated Loads

Lag Shields

Lag Shields

This is an example of a Mechanical Anchor. We carry a variety of conventional drilling and anchoring systems, each of which is different in its method of taking the applied load and transferring it through an anchor to the base material. Each type is designed for a specific application. Among these types are Cast-In-Place, Drilled In, Friction, Clamping, Compression, Undercut and Bonded Anchors.

These screw style anchors are designed for use with lag bolts. They are suitable for use in concrete and the mortar joints of block or brick walls. Stocked in diameters from 1/4" to 3/4".

Group codes Represented: SHIELD
Part# Example: 1155R, 1201R

Lag Screw Expansion Shields
Anchor Size
L
Recommended Size of Hole
Proof Test Loads*
Minimum Anchor Length
Diameter
Depth
Lbs.
1/4 short
1
1/2
1
400
1/4 long
1 1/2
1/2
1 1/2
500
5/16 short
1
1/2
1 1/4
800
5/16 long
1 3/4
1/2
1 3/4
1000
3/8 short
1 3/4
5/8
1 3/4
1300
3/8 long
1 3/4
5/8
2 1/2
1600
1/2 short
2
3/4
2
2100
1/2 long
3
3/4
3
2800
*Recommended safe working load is one-fourth of the proof test load
About Us | Contact Us | ©2006 ABC Fastener Group, Inc.