Alma Bolt Company & Prime Fasteners 1-800-526-2200

Home | Size / Thread Reference

Nail-Ins®

Nylon Nail-Ins®

This is an example of a Mechanical Anchor. We carry a variety of conventional drilling and anchoring systems, each of which is different in its method of taking the applied load and transferring it through an anchor to the base material. Each type is designed for a specific application. Among these types are Cast-In-Place, Drilled In, Friction, Clamping, Compression, Undercut and Bonded Anchors.

The Nylon Nail-Ins® is a pin drive anchor with a Zamac alloy body. Nails are available in carbon and stainless steel. The anchor can be used in concrete, block, brick, or stone, and is available with flat and mushroom head styles. Stocked in diameters from 3/16" to 1/4" and lengths from 1" to 6".

Group codes Represented: NNAILIN
Part# Example: 2561R

Nylon Nail Anchors
Nylon Anchor Size
Head Style
Head Diameter
Minimum Hole Depth
Ultimate Tensile Strength
In 3000 psi. Strength Concrete
In Hollow Material
3/16 x 1
round
3/8
1 1/4
283
178
flat
mushroom
9/16
3/16 x 1 1/2
flat
3/8
1 3/4
335
193
round
1/4 x 1
round
7/16
1 1/4
261
155
flat
mushroom
9/16
1/4 x 1 1/2
flat
7/16
1 3/4
320
188
round
mushroom
9/16

 

Zamac Nail-Ins®

The Zamac Nail-Ins® is a nail drive anchor with a Zamac alloy body. Nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick, or stone, and is available with mushroom and flat head styles. Stocked in diameters from 3/16" to 1/4" and lengths from 7/8" to 2".

Group codes Represented: ZAMAC
Part# Example: 2814R

About Us | Contact Us | ©2006 ABC Fastener Group, Inc.